Brakes - Repair Instructions
- Brake testing and bleeding
- 34 00... General Data
- 34 00 009 Checking brakes on test stand
- 34 00 010 Checking thickness of brake lining
- 34 00 017 Checking brake booster (low-pressure test)
- 34 00 047 Bleeding brake system with ABS
- 34 00 048 Bleeding brake system with ABS/ASC+T
- 34 00 050 Bleeding brake system with DSC3 750i/il from 09/96 to 09/98
- 34 00 050 Bleeding brake system with DSC3 from 09/97, 750i/iL to 09/98
- 34 00 513 Checking parking brake setting (for inspection)
- 34 00 519 Checking service brake: high- and low-pressure tests
- Front Brakes
- 34 11... Configuration of floating caliper (front)
- 34 11 000 Removing and installing/replacing brake linings on both front disk brakes
- 34 11 220 Removing and installing/replacing both front brake disks
- 34 11 519 Removing and installing or replacing left or right front brake caliper
- 34 11 552 Overhauling left or right front-brake caliper (brake caliper removed)
- 750i/iL and Z8
- 34 11 667 Fine-grinding both sides of both front brake disks (brake disks removed)
- Rear Brakes
- 34 21... Layout of floating caliper (rear)
- 34 21 200 Removing and installing or replacing brake linings on both rear disk brakes
- 34 21 320 Removing and installing or replacing both rear brake disks
- 34 21 745 Removing and installing or replacing left or right rear brake caliper
- 34 21 812 Overhauling left or right rear brake caliper (brake caliper removed)
- 34 21 947 Fine-grinding both sides of both rear brake disks (brake disks removed)
- Master Brake cylinder
- Brake line
- Brake booster
- Parking Brake
- Slip Control System
- Mechanical - Hydraulic Control Unit
- 34 51 520 Removing and installing / replacing ABS hydraulic control unit
- 34 51 525 Removing and installing or replacing ABS/ASC+T, DSC1, DSC2, DSC3 hydraulic unit up to 09/98
- 34 51 525 Removing and installing/replacing hydraulic unit ABS/ASC+T, DSC3 from 09/98
- 34 51 550 Removing and installing pre-boost pump DSC3
- 34 51 550 Removing and installing/replacing DSC3 pre-charging pump (with charging piston unit)
- 34 51 555 Removing and installing/replacing charging piston unit DSC3 up to 09/98
- 34 51 560 Removing and installing/replacing pressure sensor for DSC
- Electronic Components
- 34 52 510 Replacing control unit (for ABS)
- 34 52 515 Replacing ABS/ASC+T/DSC control module from 09/98
- 34 52 515 Replacing control module (ASC+T, DSC1, DSC2, DSC3) up to 09/98
- 34 52 525 Removing and installing / replacing front ABS impulse sensor
- 34 52 535 Removing and installing/replacing rear ABS pulse generator
- 34 52 545 Removing and installing/replacing transversal-acceleration sensor DSC3 up to 09/98
- 34 52 550 Removing and installing/replacing rotation rate sensor DSC3 from 09/98
- 34 52 550 Removing and installing/replacing rotation rate sensor DSC3 up to 09/98
- Troubleshooting