Section 144 (5X - Body General - CARRERA (997 ))
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
- WM 5X00IN General Information And Notes On Quality (All Models)
- WM 5X00IN Procedure For Damage Diagnosis (All Models)
- WM 5000IN Work Sequence Fore Determining Extent Of Damage To Vehicles Involved In An Accident (All Models)
- WM 5X00IN Work Sequence For Accident Repairs (All Models)
- WM 5X00IN (All Models)
- WM 5X00IN Tools And Metalworking Tools For Body Repairs (All Models)
- WM 5X00IN Diagram - Key To Symbols For Welding Work (All Models)
- WM 5X00IN Corrosion Protection Measures During Repairs (All Models)
- WM 5X00IN Body Parts Of Various Sheet-Steel Strengths (All Models)
- WM 5X00IN Vehicle Identification Number (All Models)
- WM 5X00IN Changing Identification Plate (All Models)
- WM 5X00IN Diagram: Plug Plan (All Models)
- WM 5X00IN Underbody Protection (All Models)
- WM 5X00IN Seam Seals (All Models)
- Accessories
- Unpainted BODYSHELL
- Top Of Front Of Vehicle
- Top Of Front Of Vehicle, Front
- Top Of Front Of Vehicle, (Radiator Tank)
- Front Of Vehicle And Inside A-Pillars
- Side Of Front Of Vehicle
- Top Of Inside Front Of Vehicle And Floor
- Top Of Lower Side Member And Floor
- Wheel Housing And Upper Rear Side Section
- Bottom Of Front Of Vehicle
- Bottom Of Lower Side Member And Floor
- Top Of Rear End
- Bottom Of Rear End
- Side Of Rear End
- Roof
- WM 5X00IN Diagram - Body Gap Dimensions (All Models)
- WM 5X00IN Diagram Of Body Bonding Points And Sealing Elements (All Models)
- WM 5X00IN Working With Body Structural Adhesive (All Models)