LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 144 (5X - Body General - CARRERA (997 )) >> WM 5X00IN Diagram: Plug Plan (All Models) >> Diagram: Plug Plan >> Side Of Rear End

Side Of Rear End

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Side Of Rear End Grommet Hole
G09831644Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Rubber grommet hole Ø 20 mm 
    1. A1 - Rubber grommet hole (only when no sliding roof) Ø 20 mm 
  2. Rubber grommet hole Ø 30 mm 
    1. B1 - Rubber grommet hole (Coupe only) Ø 30 mm 
  3. Plug (right side only) Ø 10 mm 
  4. Plug hole Ø 20 mm 
scientia non olet · About LEMON Manuals