LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 144 (5X - Body General - CARRERA (997 )) >> WM 5X00IN Working With Body Structural Adhesive (All Models) >> Working With Adhesives >> Joining Process >> Removing Excess Material

Removing Excess Material

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Remove most of the excess material with paper or a cloth.

Finish cleaning visible surfaces with a cloth soaked in acetone.

Hardened material can only be removed mechanically.

scientia non olet · About LEMON Manuals