Technical Values
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Minimum processing temperature | Betamate 2096 | Minimum temperature | 15°C | ||
| Maximum processing temperature | Betamate 2096 | Maximum temperature | 35°C | ||
| Optimal processing temperature | Betamate 2096 | Minimum temperature | 18°C | ||
| Optimal processing temperature | Betamate 2096 | Maximum temperature | 23°C | ||
| Structural bonding | Betamate 2096 | Processing time at 15 °C | 75 min | ||
| Structural bonding | Betamate 2096 | Processing time at 18 °C | 70 min | ||
| Structural bonding | Betamate 2096 | Processing time at 20 °C | 65 min | ||
| Structural bonding | Betamate 2096 | Processing time at 23 °C | 60 min | ||
| Structural bonding | Betamate 2096 | Processing time at 25 °C | 55 min | ||
| Structural bonding | Betamate 2096 | Processing time at 30 °C | 45 min | ||
| Structural bonding | Betamate 2096 | Processing time at 35 °C | 35 min | ||
| Maximum layer thickness | Layer thickness | 1 mm | |||
| Minimum hardening temperature | Betamate 2096 | Minimum temperature | 18°C | ||
| Maximum hardening temperature | Betamate 2096 | Maximum temperature | 80°C | ||
| Assembly strength | Betamate 2096 | Hardening time at 18 °C | 12 h | ||
| Assembly strength | Betamate 2096 | Hardening time at 60 °C | 35 min | ||
| Endurance strength | Betamate 2096 | Standing time at 18 °C | 96 h | ||
| Primer | Flash-off time | 5 min |