Safety Instructions For Air Conditioning
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Danger of injury due to the filled air-conditioning system bursting!
- Danger of injury due to the filled air-conditioning system bursting during welding and brazing work!
- In the case of extreme heating of filled air-conditioning systems, a very strong overpressure may be caused in the system which may lead to an explosion.
→ No welding, braying or hot-air heating may be performed on parts of the filled air-conditioning system!
→ While drying after painting work, the temperature burden on the vehicle must not exceed two hours at a maximum temperature of 80 °C!
→ Make sure that parts of the air-conditioning system do not heat up during welding or brazing work on the vehicle!