WM 5X00IN Work Sequence For Accident Repairs (All Models): Replacement
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
- Cover undamaged areas of the vehicle so that they are protected against fire
- Disconnect battery
- Pre-paint new parts from the inside
- Reshape damaged area by straightening so that adjacent contours or gap dimensions correspond to the standard condition
- Roughly cut out damaged areas
- Cut out remaining pieces
- Fit new parts in, then check the gap dimensions with the accessories fitted
- Protect spot-welded flanges against corrosion
- Observe safety and quality instructions for welding → 5000AW SAFETY INSTRUCTIONS
- Weld in new parts
- Grind visible weld seams flat; if necessary apply body solder or filler