Technical Values
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Front lid to front apron | Gap dimension A | 4.5 mm | +/-1 mm | ||
| Front lid to front apron | Lid only lowered | Gap dimension B | 2 mm | ||
| Main headlight to inner fender | Determine left and right gap | Gap dimension A | 4.5 mm | +/-1 mm | |
| Main headlight to front apron | Gap dimension A | 4 mm | +/-1.5 mm | ||
| Main headlight to external fender | Gap dimension A | 4 mm | +1 mm | ||
| Main headlight to external fender | Only lowered | Gap dimension B | 1 mm | ||
| Main headlight to top fender | Gap dimension A | 4 mm | +/-1 mm | ||
| Main headlight to top fender | Only lowered | Gap dimension B | 1 mm | ||
| Front lid to fender | Gap dimension A | 4 mm | +/-1 mm | ||
| Front lid to fender | Only lowered | Gap dimension B | 0.5 mm | ||
| Wing to front lid | Determine left and right gap | Gap dimension A | 4 mm | +1 mm | |
| Wing to front lid | Only lowered | Gap dimension B | 0.5 mm | ||
| Filler flap to fender | All the way round | Gap dimension A | 3.5 mm | +/-0.5 mm | |
| Front apron to side direction indicator | Gap dimension A | 1.5 mm | |||
| Wing to side direction indicator | Gap dimension B | 0.5 mm | +0.5 mm | ||
| Wing to outer side panel | Even transition from front to rear | Gap dimension A | 4.5 mm | +/-1 mm | |
| Door to fender | Gap dimension A | 4 mm | +/-0.5 mm | ||
| Wing to outer side panel | Gap dimension A | 4.5 mm | +/-1 mm | ||
| Wing to outer side panel | Only lowered | Gap dimension B | 2 mm | ||
| Door to outer side panel | Gap dimension A | 4.5 mm | +/-1 mm | ||
| Door to outer side panel | Doors only lowered | Gap dimension B | 2 mm | ||
| Door to outer side panel | Doors only raised | Gap dimension A | 4 mm | +/-0.8 mm | |
| Sliding roof panel at front to outer roof panel | Only lowered at front | Gap dimension A | 5 mm | ||
| Sliding roof panel at rear to outer roof panel | Only raised at rear | Gap dimension A | 6 mm | ||
| Roof joint strip to outer roof panel | Gap dimension A | 2 mm | |||
| Windscreen to windscreen frame | Only lowered | Gap dimension A | 2 mm | ||
| Cowl panel frame to fender | Continuous transition | Gap dimension A | 3 mm | +/-1 mm | |
| Door window to side window | Door window lowered by max. 1 mm | Gap dimension A | 7 mm | +/-1 mm |