Overview, Undersealing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Information

In the case of repair work, the standard stone shield/undersealing of the body structure must be restored before painting or unit assembly, according to the following illustrations.
The undersealing can only be applied to primed sheetmetal.

Fig 1: Overview Of Undersealing
Courtesy of PORSCHE CARS NORTH AMERICA, INC.

0.2 mm to 0.4 mm
0.5 mm to 0.7 mm
1 mm to 1.3 mm
0.4 mm to 0.6 mm