LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 144 (5X - Body General - CARRERA (997 )) >> WM 5X00IN Procedure For Damage Diagnosis (All Models) >> No Identifiable Deformations On The Body Structure

No Identifiable Deformations On The Body Structure

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check seam joining line on the accessories

    → 5000IN DIAGRAM - BODY GAP DIMENSIONS

  2. Check accessories for paint abrasion (accessories that were impacted during the crash)
  3. Drive the vehicle onto a lifting platform and raise it. Measure screw points using an electronic measuring system (e.g. Measuring unit, professional WE 1397  ) and compare with the required values.
  4. Determine the extent of any damage to chassis components

    Measure the chassis electronically if necessary

    → 449503 SUSPENSION ALIGNMENT, COMPLETE

  5. Decide whether the vehicle has to be repaired

    Repair the vehicle, if necessary.