LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 144 (5X - Body General - CARRERA (997 )) >> WM 5X00IN Working With Body Structural Adhesive (All Models) >> Working With Adhesives >> Joining Process >> Joining Components

Joining Components

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Join parts, secure them and weld, rivet and screw them within the processing time.

The joining process must take place immediately after applying adhesive in order to guarantee a high quality and reliable bond.

Otherwise the adhesive bead must be removed and pre-treatment of the surface and application of the adhesive must be repeated.

scientia non olet · About LEMON Manuals