Work Sequence For Accident Repairs
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Procedure for accident repairs.
- Determine scope of damage
- Expose the area to be repaired
- Make an economic or technical decision: Should parts be repaired or replaced?
- Determine the scope of replacement parts and order the parts
See "REPAIRS " below.
See "REPLACEMENT " below.
- If necessary, prime and seal the seam areas
- If necessary, renew the stone impact protection
- Paint the repaired area
- If necessary, touch up the undersealing
- Seal cavities
- Fit accessories