Metalworking Tools

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Electrical equipment

Information

Detailed and additional information about tools and equipment can be found in the "Workshop Equipment" Information.

Fig 1: Identifying Electrical Equipment
Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Drill
Angle Grinder, Large
Angle Grinder, Small
Sander
Hot-Air Gun
Mechanical equipment

Information
- Detailed and additional information about tools and equipment can be found in the "Workshop Equipment" Information.
  
  Fig 2: Mechanical Equipment
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Hole Punch
Edge Setter
Compressed-Air Equipment

Information
- Detailed and additional information about tools and equipment can be found in the "Workshop Equipment" Information.
  
  Fig 3: Identifying Compressed-Air Equipment
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Air Chisel
Body Saw
Spot-Weld Remover
Welding Equipment

Information
- Detailed and additional information about tools and equipment can be found in the "Workshop Equipment" Information.
  
  Fig 4: Identifying Welding Equipment
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Spotweld Device And Multispot Metalworking Tool
MIG Welder