Section 532 (Engine - Repair Instructions - X5 (3.0L))
WARNING: This page is about a different car, the 2003 BMW X5, 2002 BMW X5, and 2001 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
- Engine, General
- Cylinder Head With Cover
- 11 12 000 Removing and installing, sealing cylinder head cover (M52TU / M54 / M56)
- 11 12 100 Removing and installing/sealing cylinder head (M54)
- 11 12 101 Replacing cylinder head gasket (M52 / S52 / M52TU / M54 / M56)
- 11 12 503 Disassembling and assembling cylinder head (M52 / S52 / M52TU / M54 / M56)
- 11 12 527 Remachining a valve seat (M52 / S52 / M52TU / M54 / M56)
- 11 12 595 Checking a valve guide for wear (M52 / S52 / M52TU / M54 / M56)
- 11 12 600 Reaming a valve guide (M52 / S52 / M52TU / M54 / M56)
- 11 12 719 Resurfacing cylinder head sealing surface (M52 / M52TU / M54 / M56)
- 11 12 729 Checking cylinder head for watertightness (M52TU / M54 / M56)
- Oil Sump
- Housing Cover
- Crankshaft With Bearing
- Flywheel
- Vibration Damper
- Connecting Rod With Bearing
- Piston With Rings and Pin
- V-Ribbed Belt W/Tens. Deflect Element
- Camshaft
- Valves With Springs
- Variable Camshaft Timing
- Oil Supply
- Oil Pump With Filter and Drive
- Oil Filter And Lines
- Water Pump With Drive
- Fan
- Thermostat And Connections
- Intake Manifold
- Exhaust Manifold
- Emission Control, Oxygen Sensor