Section 795 (10 - Engine - Crankcase, Suspension 4.8L Turbo -- 970 - PANAMERA (970))
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 Porsche Panamera, 2015 Porsche Panamera, 2014 Porsche Panamera, 2013 Porsche Panamera, and 2012 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
- WM, 100119 Removing And Installing Engine
- WM, 100127 Removing Engine From Transmission And Mounting Engine On Transmission
- WM, 1001IN Supporting Engine On The Body (Engine Safety Device)
- WM, 1001IN Information On Working With Aluminium Screws And Magnesium Components - Important!
- WM, 1001IN Securing Engine On Assembly Support (Mounting Bracket)
- WM, 1001IN Lifting The Engine (Workshop Crane)
- WM, 1001IN Tightening Torques, Tightening Sequences And Assembly Overviews
- Technical Values
- Information
- 10, Crankcase
- 13, Crankshaft Belt Drive
- 15 Cylinder Head Valve Train
- Overview Of Threaded Joints For Oil Guide Housing
- 19, Cooling
- 21, Turbocharging
- 24, Fuel System
- 26, Exhaust, Secondary Air
- Generator And Starter
- Knock Sensor
- Vacuum Pump
- Tandem Pump And Power-Steering Pump
- Air-Conditioning Compressor
- WM, 1001IN Engine Number Marking
- WM, 1001Z1 Disassembling Engine
- WM, 1001Z2 Assembling Engine
- WM, 100431 Converting Reconditioned Engine (Replacing Engine)
- WM, 101001 Assessment Of Cylinder Liners
- WM, 101031 Converting Crankcase (Dowel Sleeves)
- WM, 101055 Replacing Crankcase
- WM, 101320 Removing And Installing Oil Spray Jets
- WM, 101802 Checking Pressure Loss Of Cylinders
- WM, 103519 Removing And Installing Engine Mounting (Turbo)
- WM, 103719 Removing And Installing Torque Support
- WM, 1052IN Information On Engine Ventilation Systems On Turbo Engines (OBD2) - Especially For USA
- WM, 105519 Removing And Installing Oil Mist Separator
- WM, 108319 Removing And Installing Engine Cover (Design Cover)