Removing Oil Mist Separator
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 Porsche Panamera, 2015 Porsche Panamera, 2014 Porsche Panamera, 2013 Porsche Panamera, and 2012 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Overview of oil mist separator
| 1 |
Engine ventilation/oil mist separator |
| 2 |
Moulded seal |
| 3 |
Moulded seal |
| 4 |
Screw elements, M6 |
Disconnect line connections to the connection piece on the oil mist separator. To do this, press on the grooved surfaces and pull off
- The connection. -1-
 Courtesy of PORSCHE CARS NORTH AMERICA, INC.
|
Oil mist separator
- Loosen screws -2-
. Screws are permanently connected. If screws are damaged, press the screws out of the oil mist separator and replace them.
- Remove oil mist separator from the valve cover. At the same time, check the seals and replace them if damaged.