General Overview
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 Porsche Panamera, 2015 Porsche Panamera, 2014 Porsche Panamera, 2013 Porsche Panamera, and 2012 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
Information
- The tightening steps in the tightening sequences relate to tightening screws uniformly, i.e. all affected screws must first be tightened uniformly to the first torque value, then all screws are tightened one stage further, and soon.
- Replace all O-rings following removal!
Information
- A differentiation between the all-wheel engine and the rear-wheel drive engine is identified by the terms 4WD and 2WD.
The torques specified in the table below generally apply to screws that are not specifically listed =>
The bolt quality is indicated on the screw head at the top as a decimal number, e.g. "8.8" or "12.9".
| Bolt quality 8.8 | Bolt quality 10.9 | Bolt quality 12.9 | |||
|---|---|---|---|---|---|
| Thread | [Nm (ftlb.)] | Thread | [Nm (ftlb.)] | Thread | [Nm (ftlb.)] |
| M4 | 3 (2) | M4 | 4 (3) | M4 | 5 (3.5) |
| M5 | 6 (4.5) | M5 | 8 (6) | M5 | 10 (7.5) |
| M6 | 10 (7.5) | M6 | 13 (9.5) | M6 | 16 (12) |
| M8 | 23 (17) | M8 | 33 (24) | M8 | 39 (29) |
| M10 | 45 (33) | M10 | 65 (48) | M10 | 80 (59) |
| M10 x 1.25 | 50 (37) | M10 x 1.25 | 70 (52) | M10 x 1.25 | 85 (63) |
| M12 | 80 (59) | M12 | 115 (85) | M12 | 135 (100) |
| M12 x 1.25 | 90 (67) | M12 x 1.25 | 125 (93) | M12 x 1.25 | 150 (111) |
| M12 x 1.5 | 85 (63) | M12 x 1.5 | 120 (89) | M12 x 1.5 | 145 (107) |
| M14 | 130 (96) | M14 | 180 (133) | M14 | 220 (163) |
| M16 | 200 (148) | M16 | 280 (207) | M16 | 335 (248) |