Generator And Starter

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 Porsche Panamera, 2015 Porsche Panamera, 2014 Porsche Panamera, 2013 Porsche Panamera, and 2012 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Generator Components Location With Torque Specification

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Generator

1	Generator
2	Screw. M8 x 95 > Tightening torque 23 (1 7 ftlb.) Nm
3	Screw. M8 x 35 > Tightening torque 23 Nm (17 ftlb.)
4	Bores for screws, M8 x 95
A	View

Location	Description	Type	Basic value
Nut for B+ line to generator	M8 - Item 1	Tightening torque	15 Nm
Courtesy of PORSCHE CARS NORTH AMERICA, INC. B+ line at the generator
Screw on generator	M6	Tightening torque	10 Nm (7.5 ftlb.)
Courtesy of PORSCHE CARS NORTH AMERICA, INC. Holder for three-phase generator lines
Screws securing crash console to three-phase generator	M6 - Item 4	Tightening torque	10 Nm
Courtesy of PORSCHE CARS NORTH AMERICA, INC. Crash console
Screw securing ground cable to generator	M8 - Item 1	Contact force	20 Nm
Courtesy of PORSCHE CARS NORTH AMERICA, INC. Securing ground strap on generator

Fig 2: Starter Components Location With Torque Specification

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Starter

1	Starter; Start Stop starter is larger
2	Screw. M1 Ox 45 > Tightening torque 45 Nm (33 ftlb.)

Location	Description	Type	Basic value	Tolerance
Nut securing B+ line to starter		Tightening torque	18 Nm
Nut for electric line to starter		Tightening torque	6.5 Nm