Installing Oil Mist Separator

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 Porsche Panamera, 2015 Porsche Panamera, 2014 Porsche Panamera, 2013 Porsche Panamera, and 2012 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Oil Mist Separator Components Location

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Overview of oil mist separator

1	Engine ventilation/oil mist separator
2	Moulded seal
3	Moulded seal
4	Screw elements, M6

Check seals on oil mist separator and replace if damaged.
Place oil mist separator in installation position.
Fit oil mist separator evenly onto the valve cover.
Screw in and tighten screws for oil mist separator by hand -2- . Screws are permanently connected. If screws are damaged, press the screws out of the oil mist separator and replace them.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Oil mist separator
Fit line connections to the connection pieces on the oil mist separator -1- You should hear and feel the lines engage.