LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Macan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 795 (10 - Engine - Crankcase, Suspension 4.8L Turbo -- 970 - PANAMERA (970)) >> WM, 103519 Removing And Installing Engine Mounting (Turbo) >> Removing Left Engine Mount

Removing Left Engine Mount

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 Porsche Panamera, 2015 Porsche Panamera, 2014 Porsche Panamera, 2013 Porsche Panamera, and 2012 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Loosen the four fastening screws on the heat shield -arrows-  for the final drive.
    G15197877Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Screws on heat shield (illustration shows removed primary catalytic converter, but left primary catalytic converter remains fitted)

  2. Take out the heat shield. -arrow- 
    G15197878Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Removing heat shield

  3. Press against the engine mount from below -arrow-  and loosen the fastening nuts on the engine mount.
    G15197879Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Loosening engine mount (figure shows 4WD turbo engine)

  4. Remove engine mount from the guide. -arrow- 
    G15197880Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Removing engine mount