Engine Mechanical - 2.0L Non-Turbo - Lancer

• General Information
• Engine Diagnosis
• Service Specifications
• Sealants And Adhesive
• Special Tools
• On-Vehicle Service
  • Drive Belt Tension Check
  • Auto-TENSIONER Check
    • Operation Check
    • Function Check
  • Valve Clearance Check And Adjustment
  • Ignition Timing Check
  • Curb Idle Speed Check
  • Idle Mixture Check
  • Compression Pressure Check
  • Manifold Vacuum Check
• Crankshaft Pulley
  • Removal And Installation
    • Notes
    • Removal Service Points
      • << A >> Radiator Condenser Tank Assembly Removal
      • << B >> Drive Belt Removal
      • << C >> Crankshaft Pulley Center Bolt/Crankshaft Pulley Washer/Crankshaft Pulley Removal
    • Installation Service Points
      • >> A << Crankshaft Pulley/Crankshaft Pulley Washer/Crankshaft Pulley Center Bolt Installation
      • >> B << Drive Belt Installation
• Camshaft
  • Removal And Installation
    • Notes
    • Removal Service Points
      • << A >> Rocker Cover Assembly Removal
      • << B >> Number 1 Cylinder Compression Top Dead Center Setting
      • << C >> Camshaft And Camshaft Sprocket Assembly (Exhaust Side) Removal Preparatory Operation
      • << D >> Front Camshaft Bearing Cap Removal
      • << E >> Oil Feeding Camshaft Bearing Cap/Camshaft Bearing Cap/Thrust Camshaft Bearing Cap Removal
      • << F >> Camshaft And Camshaft Sprocket Assembly (Exhaust Side) Removal
      • << G >> Camshaft Sprocket/Camshaft Removal
      • << H >> Oil Feeder Control Valve Removal
    • Installation Service Points
      • >> A << O-Ring/Oil Feeder Control Valve Installation
      • >> B << Camshaft/Camshaft Sprocket Installation
      • >> C << Camshaft And Camshaft Sprocket Assembly (Intake Side) Installation
      • >> D << Thrust Camshaft Bearing Cap/Camshaft Bearing Cap/Oil Feeding Camshaft Bearing Cap/Camshaft Bearing Installation
      • >> E << Camshaft Bearing/Camshaft And Camshaft Sprocket Assembly (Exhaust Side) Installation
      • >> F << Front Camshaft Bearing Cap Installation
      • >> G << Rocker Cover Assembly Installation
• Valve Stem Seal
  • Removal And Installation
    • Notes
    • Removal Service Points
      • << A >> Front Camshaft Bearing Cap Removal
      • << B >> Oil Feeding Camshaft Bearing Cap/Camshaft Bearing Cap/Thrust Camshaft Bearing Cap Removal
      • << C >> Valve Tappet Removal
      • << D >> Valve Spring Retainer Lock Removal
      • << E >> Valve Stem Seal Removal
    • Installation Service Points
      • >> A << Valve Stem Seal Installation
      • >> B << Valve Spring Retainer Lock Installation
      • >> C << Valve Tappet Installation
      • >> D << Thrust Camshaft Bearing Cap/Camshaft Bearing Cap/Oil Feeding Camshaft Bearing Cap Installation
      • >> E << Camshaft Bearing/Camshaft And Camshaft Sprocket Assembly (Exhaust Side) Installation
      • >> F << Front Camshaft Bearing Cap Installation
• Oil Pan
  • Removal And Installation
    • Notes
    • Removal Service Points
      • << A >> A/C Compressor And Clutch Assembly Removal
      • << B >> Engine Oil Pan Removal
    • Installation Service Points
      • >> A << Engine Oil Pan Installation
      • >> B << Engine Oil Pan Drain Plug Gasket Installation
      • >> C << A/C Compressor And Clutch Assembly Installation
  • Inspection
• Crankshaft Oil Seal
  • Removal And Installation
    • Notes
    • Removal Service Point
      • << A >> Flywheel Bolt < M/T >/Drive Plate Bolt < CVT > Removal
    • Installation Service Points
      • >> A << Crankshaft Rear Oil Seal Installation
      • >> B << Drive Plate < CVT >/Adapter Plate < CVT >/Drive Plate Bolt < CVT >/Flywheel Assembly < M/T >/Flywheel Bolt < M/T > Installation
      • >> C << Crankshaft Front Oil Seal Installation
• Cylinder Head Gasket
  • Removal And Installation
    • Notes
    • Removal Service Points
      • << A >> Radiator Upper Hose/Radiator Lower Hose Disconnection
      • << B >> Fuel High-Pressure Hose Disconnection
      • << C >> Front Camshaft Bearing Cap Removal
      • << D >> Oil Feeding Camshaft Bearing Cap/Camshaft Bearing Cap/Thrust Camshaft Bearing Cap Removal
      • << E >> Cylinder Head Bolt/Cylinder Head Bolt Assembly Removal
    • Installation Service Points
      • >> A << Cylinder Head Gasket/Cylinder Head Assembly Installation
      • >> B << Cylinder Head Bolt Assembly/Cylinder Head Bolt Installation
      • >> C << Camshaft Bearing/Camshaft And Camshaft Sprocket Assembly Installation
      • >> D << Thrust Camshaft Bearing Cap/Camshaft Bearing Cap/Oil Feeding Camshaft Bearing Cap Installation
      • >> E << Front Camshaft Bearing Cap Installation
      • >> F << Fuel High-Pressure Hose Connection
      • >> G << O-Ring Installation
      • >> H << Radiator Lower Hose/Radiator Upper Hose Connection
• Timing Chain
  • Removal And Installation
    • Notes
    • Removal Service Points
      • << A >> Crankshaft Pulley Removal
      • << B >> Engine And Transaxle Assembly Holding
      • << C >> Timing Chain Case Assembly Removal
      • << D >> Timing Chain TENSIONER Removal
    • Installation Service Points
      • >> A << Timing Chain Installation
      • >> B << Timing Chain TENSIONER Installation
      • >> C << Crankshaft Front Oil Seal Installation
      • >> D << Timing Chain Case Assembly Installation
      • >> E << Water Pump Pulley Installation
• Engine Assembly
  • Removal And Installation
    • Notes
    • Removal Service Points
      • << A >> Radiator Upper Hose/Radiator Lower Hose Disconnection
      • << B >> Fuel High-Pressure Hose Disconnection
      • << C >> A/C Compressor And Clutch Assembly Removal
      • << D >> Manual Transaxle Assembly/CVT Assembly Removal
      • << E >> Engine Mounting Insulator Removal
      • << F >> Engine Assembly Removal
    • Installation Service Points
      • >> A << Engine Assembly Installation
      • >> B << Engine Mounting Insulator Installation
      • >> C << A/C Compressor And Clutch Assembly Installation
      • >> D << Fuel High-Pressure Hose Connection
      • >> E << Radiator Lower Hose/Radiator Upper Hose Connection