LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 2.0L Non-Turbo - Lancer >> Engine Assembly >> Removal And Installation >> Removal Service Points >> << B >> Fuel High-Pressure Hose Disconnection

<< B >> Fuel High-Pressure Hose Disconnection

  1. Remove the stopper of the fuel high-pressure hose.
    Fig 1: Identifying Stopper
    G06480977Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  2. Raise the retainer of the fuel high-pressure hose and pull out the fuel high-pressure hose in the direction shown in the figure.
    NOTE: If the retainer is released, install it securely after removing the fuel high-pressure hose.
    Fig 2: Raising Retainer Of Fuel High-Pressure Hose
    G06480978Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals