General Information
The 4B11 (2.0 L) engine is an in-line four-cylinder engine. The cylinder numbers are assigned as 1-2-3-4 from the front of the engine (timing chain side). The firing order is 1-3-4-2.
| Item | Specification | ||
|---|---|---|---|
| Type | In-line DOHC | ||
| Number of cylinders | 4 | ||
| Bore mm (in) | 86 (3.39) | ||
| Stroke mm (in) | 86 (3.39) | ||
| Total displacement cm3 (cu. in) | 1,998 (121.9) | ||
| Compression ratio | 10.0 | ||
| Firing order | 1-3-4-2 | ||
| Valve timing | Intake valve | Opens (BTDC) | 3° - 28° |
| Closes (ABDC) | 45° - 20° | ||
| Exhaust valve | Opens (BBDC) | 41° - 21° | |
| Closes (ATDC) | 3° - 23° | ||
| Lubrication system | Pressure feed, full-flow filtration | ||
| Oil pump type | Trochoid type | ||