LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 2.0L Non-Turbo - Lancer >> Timing Chain >> Removal And Installation >> Installation Service Points >> >> C << Crankshaft Front Oil Seal Installation

>> C << Crankshaft Front Oil Seal Installation

  1. Apply a small amount of engine oil to the entire inner diameter of the crankshaft front oil seal lip.
    CAUTION: When installing the crankshaft front oil seal, be careful to avoid damage to the crankshaft front oil seal.
  2. Using special tool MB991448, press in the crankshaft front oil seal up to the chamfered surface of timing chain case.
    Fig 1: Installing Crankshaft Front Oil Seal
    G06480974Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals