LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 2.0L Non-Turbo - Lancer >> Cylinder Head Gasket >> Removal And Installation >> Installation Service Points >> >> F << Fuel High-Pressure Hose Connection

>> F << Fuel High-Pressure Hose Connection

CAUTION: After connecting the fuel high-pressure hose, slightly pull it in the pull-out direction to check that it is installed firmly. In addition, check that there is approximately 1 mm (0.04 inch) play. After the check, install the stopper securely.
Fig 1: Identifying Stopper
G06480995Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.