LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 2.0L Non-Turbo - Lancer >> Timing Chain >> Removal And Installation >> Installation Service Points >> >> E << Water Pump Pulley Installation

>> E << Water Pump Pulley Installation

Temporarily tighten the water pump pulley mounting bolts. Then, tighten them to the specified torque after the installation of drive belt.

Tightening torque: 9.0 ± 1.0 N.m (80 ± 9 in-lb) 

scientia non olet · About LEMON Manuals