Section 343 (Front End & Fire Wall -- CLK350 Coupe (209.356))
WARNING: This page is about a different car, the 2009 Mercedes-Benz CLK350 and 2008 Mercedes-Benz CLK350. However, it is still accessible from the selected car via links, so may be relevant.
- General Information
- Testing & Repair
- Testing and repair work: Passenger cars: Front end and fire wall - AR62.00-Z-9209AA
- Cut out wheel well on engine compartment side - AR62.20-P-1200-03P
- Cut out wheel well on passenger compartment side - AR62.20-P-1200-11P
- Separate wheel well on fender side - AR62.20-P-1200-12P
- Prepare body for welding in wheel well - AR62.20-P-1200-13P
- Preparing wheel well for welding - AR62.20-P-1200-14P
- Install and weld in wheel well - AR62.20-P-1200-17P
- Replace complete wheel well - AR62.20-P-1200P
- Remove/install partition wall on upper firewall - AR62.20-P-1221A
- Separate longitudinal member front section - AR62.20-P-1260-01P
- Weld in longitudinal member cover - AR62.20-P-1260-04P
- Prepare longitudinal member front section - AR62.20-P-1260-05P
- Install and weld in longitudinal member front section - AR62.20-P-1260-07P
- Replace longitudinal member front section - AR62.20-P-1260P
- Separate upper front longitudinal member - AR62.20-P-1286-01P
- Prepare upper front longitudinal member - AR62.20-P-1286-02P
- Install upper front longitudinal member - AR62.20-P-1286-03P
- Installing check and welding device - AR62.20-P-1286-04PA
- Installing check and welding device - AR62.20-P-1286-04PE
- Replace upper front longitudinal member - AR62.20-P-1286P
- Separate bottom firewall section - AR62.25-P-1100-01P
- Preparing bottom section of firewall for installation - AR62.25-P-1100-02P
- Install bottom section of firewall - AR62.25-P-1100-03P
- Partially remove/install bottom section of firewall - AR62.25-P-1100P
- Remove/install front frame cross member - AR62.30-P-0001P
- Adjust front module - AR62.30-P-1570-01P
- Replace complete front end assembly together with reinforcement - AR62.30-P-1570P
- Remove/install strut tower brace - AR62.30-P-2500QBS
- Torque Specifications
- Special Tools
- 140 589 26 63 01 Steel stamping letters set - WS62.00-P-0018-01K
- 140 589 26 63 02 Steel stamping letters retrofit kit - WS62.00-P-0018-02K
- 140 589 26 63 03 Stamping numbers set - WS62.00-P-0018-03K
- 140 589 26 63 04 Star die - WS62.00-P-0018-04K
- 140 589 26 63 05 Steel stamping letters set - WS62.00-P-0018-05K
- 140 589 26 63 00 Stamping symbols set - WS62.00-P-0018K
- 203 589 05 23 00 Inspection and welding device - WS62.00-P-0033K
- 203 589 00 27 00 Tension device - WS62.00-P-0110K
- 203 589 01 27 00 Puller - WS62.00-P-0111K
- 211 589 05 63 00 Fastening belt - WS62.00-P-0124K
- Special tools: Passenger cars: Front end and fire wall - WS62.00-Z-9999AZ