Section 1934 (Collision - Body Panel Repair (E82))
WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2013 BMW 135is, 2013 BMW 135i, 2013 BMW 128i, 2012 BMW 135i, and 2012 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.
- Body Panel Repair
- 41 00...AFGS Procedure After Accident (Active Pedestrian Protection)
- 41 00...Blind Rivets
- 41 0 General Contents Of Body Repair
- 41 00... Bonding Steel On Steel
- 41 00... Carrying Over Hole Pattern
- 41 00... Corrosion Protection
- 41 00...EMC Screws
- 41 00... General Cementing Instructions
- 41 00... Grinding Steel Parts
- 41 00... Gun For Cavity Sealing
- 41 00... Handling Airbags And Restraint Systems
- 41 00... Handling Electrical And Electronic Equipment
- 41 00... Information/Warning Labels
- 41 00... Information On Hazards
- 41 00... Information On Vehicle Protection
- 41 00... Installation Solution For Straight Shank/Hexagon Rivet Nut
- 41 00... Installing A Cavity Acoustic Baffle (Expanded)
- 41 00... Installing A Cavity Acoustic Baffle (Not Expanded)
- 41 00... Installing A Cavity Acoustic Baffle With 2-Component PU Cavity Foam
- 41 00... Materials Science
- 41 00... Notes On Adhesive K1
- 41 00... Notes On Adhesive K2
- 41 00... Notes On Adhesive K3
- 41 00... Notes On Adhesive K4
- 41 00... Notes On Adhesive K5
- 41 00... Notes On Cleaning Agent R1
- 41 00... Notes On Repairing Threads
- 41 00... Opening Adhesive Bonds
- 41 00... Opening Brazed Joints
- 41 00... Opening Riveted Joints
- 41 00... Opening Weld Joints
- 41 00... Overview Of Expendable Materials
- 41 00... Overview Of Adhesive Cartridge Guns
- 41 00... Overview Of Consumables (Electronic Parts Catalogue)
- 41 00... Position Of Shaped Parts For Cavity Acoustic Baffle
- 41 00... Punch Rivets
- 41 00... Quality Standard
- 41 00... Repair Solution For Straight Shank/Hexagon Rivet Nut
- 41 00... Riveting Aluminum Parts
- 41 00... Riveting Steel Parts
- 41 00... Safety At Work
- 41 00... Spot-Weld Bonding Steel Parts
- 41 00... Stamping Vehicle Identification Number
- 41 00... Straightening Aluminum Components In Structure
- 41 00... Straightening Aluminum Parts On Outer Skin
- 41 00... Straightening Steel Parts On Outer Skin
- 41 00... Straightening Steel Components In The Structure
- 41 00... Straightening Steel Parts
- 41 00... Use Of Materials In Outer Shell
- 41 00... General Vehicle Identification Number
- 41 00... Welding And Soldering Steel Parts
- 41 00... Welding In Reinforcement Plate (Steel Plate)
- 41 00... Working With 2-Component PU Cavity Foam
- 41 00... Workshop Equipment
- 41 05 800 Releasing Bonded Folded Seam Connections
- Support Members
- 41 11 023 Replacing Front Section Of Engine Support To Left Wheel Arch
- 41 11 028 Replacing Left Engine Carrier (Partial Replacement Before Front Axle)
- 41 11 043 Replacing Front Section Of Left Engine Support
- 41 11 141 Replacing Cover For Left Or Right Frame Side Member (Partial Replacement Between A-And B-Pillars)
- 41 11 516 Replacing Front Left Or Right Support Carrier (Partial Replacement, Front Side Panel Removed)
- Luggage Compartment Floor
- 41 12 535 Replacing Complete Rear Luggage Compartment Floor (Tail Panel Removed)
- 41 12 560 Replacing Luggage Compartment Floor (Complete With Both Inner Wheel Arch Sections, Tail Panel Removed)
- 41 12 590 Replacing Luggage Compartment Floor (Complete With Left Or Right Inner Wheel Arch Section, Tail Panel Removed)
- 4112651 Replacing Luggage Compartment Floor, Left Section (Tail Panel Or Side Wall Removed)
- 4112557 Replacing Luggage Compartment Floor, Middle Stripping Operations (Tail Panel Removed)
- 4112535 Replacing Complete Rear Luggage Compartment Floor Stripping Operations (Tail Panel Removed)
- Wheel Wells
- Side Frame And Door Pillars
- Outer Roof Skin
- Front Trim Panel
- Rear Trim Panel
- Side Panels
- Rear Side Doors
- Front Lid
- 41 61 000 Removing And Installing Hood/Bonnet
- 41 61 014 Adjusting Engine Bonnet/Hood
- 41 61 014 Adjusting Engine Compartment Lid (For Vehicles With Active Pedestrian Protection AFGS)
- 41 61... ChECKING HINGE FOR ENGINE COMPARTMENT LID (FOR VEHICLES WITH ACTIVE PEDESTRIAN PROTECTION SYSTEM)
- 41 61 010 Removing And Installing Engine Compartment Lid (Active Pedestrian Protection AFGS)
- 41 61 571 Removing And Installing/Replacing Left Hinge For Engine Compartment Lid, (For Vehicles With Active Pedestrian Protection AFGS)
- 51 23 400 Removing And Installing/Replacing Left Or Right Actuator (Active Pedestrian Protection)
- Rear Lid
- Other Flaps