41 62 520 Removing And Installing/Replacing Left Or Right Hinge For Rear Lid (Rear Lid Removed)
WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2013 BMW 135is, 2013 BMW 135i, 2013 BMW 128i, 2012 BMW 135i, and 2012 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.
Read contents of Body, General . Refer to 41 0 Contents of Body, General
Release screws (1).
Tightening torque, see 41 62 3AZ in 41 62 REAR LID .
Remove hinge (2).
Adjust rear lid on the basis of the body gap dimensions . Refer to 41 00... BODY GAP DIMENSIONS .
Replacing hinge only:
Remove gas-filled strut for rear lid. Refer to 51 24 300 REMOVING AND INSTALLING OR REPLACING LEFT OR RIGHT GAS STRUT FOR REAR LID .