41 61... ChECKING HINGE FOR ENGINE COMPARTMENT LID (FOR VEHICLES WITH ACTIVE PEDESTRIAN PROTECTION SYSTEM)
WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2013 BMW 135is, 2013 BMW 135i, 2013 BMW 128i, 2012 BMW 135i, and 2012 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove hinge for engine compartment lid
Open and close hinge (1).
Place hinge (1) on a level surface.
Check holes (2) for dimensional accuracy relative to support.
Dimension a=32 mm
Measurement b = 30 mm
| Test result | Solution |
|---|---|
| Hinge is stiff | Replace hinge |
| Faulty dimensional accuracy | Replace hinge |