41 62 000 Removing And Installing Rear Lid
WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2013 BMW 135is, 2013 BMW 135i, 2013 BMW 128i, 2012 BMW 135i, and 2012 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.
Read contents of Body, General . Refer to 41 0 Contents of Body, General .
Necessary preliminary tasks:
- Remove panel for rear lid . Refer to 51 49 000 REMOVING AND INSTALLING/REPLACING PANEL FOR REAR LID .
- Disconnect all plug and socket cable connections on rear lid.
Carry over the work step shown symmetrically to the other side of the vehicle.
Slacken screws (1)
Unfasten screws (2).
Tightening torque, see 41 62 1AZ in 41 62 REAR LID .
Remove rear lid.
Installation:
Adjust rear lid . Refer to 41 62 014 Adjusting Rear Lid .