Grinding And Cleaning
WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2013 BMW 135is, 2013 BMW 135i, 2013 BMW 128i, 2012 BMW 135i, and 2012 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.
- For better adhesion, remove oxide film, rust, paint and scale from the adhesive areas with a wire brush or emery paper.
- Clean adhesive areas with isopropanol, acetone or spirit.
- Allow cleaned surfaces to dry for approx. 5 minutes.
Adhesive areas must be completely dry.