41 00... Position Of Shaped Parts For Cavity Acoustic Baffle
WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2013 BMW 135is, 2013 BMW 135i, 2013 BMW 128i, 2012 BMW 135i, and 2012 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.
Cavity sealing is carried out in specific body areas in order to reduce internal noise and to reduce condensate. To do this, shaped parts are inserted in the cavities. These shaped parts adapt themselves optimally due to heating of the body to approx. 180°C by expansion to the shape of the cavities.
Because it is not possible to heat the body to this extent for a body repair, a different procedure has been specified for this situation. Refer to 41 00... Installing A Cavity Acoustic Baffle (Expanded) , 41 00... Installing A Cavity Acoustic Baffle (Not Expanded) and 41 00... Installing A Cavity Acoustic Baffle With 2-Component PU Cavity Foam .