41 00... Use Of Materials In Outer Shell
WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2013 BMW 135is, 2013 BMW 135i, 2013 BMW 128i, 2012 BMW 135i, and 2012 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.
The following illustration is a schematic representation of all the body variants.
Apply this illustration to the relevant vehicle.
All components not listed in the table below are composed of established sheet steel qualities.
OUTER SHELL MATERIALS TABLE
| Component | Vehicle | Material |
|---|---|---|
| (1) Side panel, front | E52 (Z8) | Aluminum |
| - | E60, E61 | Aluminum |
| - | E63, E64 | Plastic (thermoplastic) |
| - | E65, E66: | Aluminum |
| - | E70, E92, E93 | Plastic (thermoplastic) |
| (2) Front door | E36/C (M3) | Aluminum or steel |
| - | E36/2 (M3) | Aluminum or steel |
| - | E52 (Z8) | Aluminum |
| - | E63, E64 | Aluminum |
| (4) Side panel, rear | E52 (Z8) | Aluminum |
| (5) Engine hood | E38 (750i) | Aluminum or steel |
| - | E46/C (M3) | Aluminum |
| (5) Engine hood | E46/2 (M3) | Aluminum |
| - | E52 (Z8) | Aluminum |
| - | E60, E61, E63, E64 | Aluminum |
| - | E65, E66, E70, E71 | Aluminum |
| - | E85 (Z4) | Aluminum |
| - | E92 (M3) | Aluminum |
| (6) Hardtop/roof | E36/C | Aluminum |
| - | E36/7 (Z3) | Plastic (glass fiber/epoxy resin) |
| - | E46/C | Aluminum |
| - | E46/2 (M3 CSL) | Plastic (CFK) |
| - | E52 (Z8) | Plastic (PU) |
| - | E85 (Z4) | Plastic (SMC) |
| - | E63 (M6) | Plastic (CFK) |
| (7) Soft top lid | E46/C | Magnesium |
| - | E64 | Plastic (SMC) |
| (8) Rear lid | E46/2 (M3 CSL) | Plastic (SMC) |
| - | E52 (Z8) | Aluminium |
| - | E63, E64 | Plastic (SMC) |