Section 92 (3.0L - Cylinder Head & VALVETRAIN - Engine Code: CPNB)
WARNING: This page is about a different car, the 2015 Audi A7 Quattro and 2014 Audi A7 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- 15 Cylinder Head, VALVETRAIN
- Timing Chain Cover
- Chain Drive
- Cylinder Head
- Overview - Cylinder Head
- Overview - Cylinder Head Cover
- Cylinder Head, Removing And Installing
- Cylinder Head Cover, Removing And Installing
- Cylinder Head Cover Left And Right, Installing And Removing, Vehicles With A Turbocharger
- Cylinder Head Cover Right, Installing And Removing, Vehicles With A Turbocharger
- Cylinder Head Cover Left, Installing And Removing, Vehicles With Two Turbochargers
- Cylinder Head Cover Right, Installing And Removing, Vehicles With Two Turbochargers
- Fuel Injector Seals, Removing And Installing
- Compression Pressure, Checking
- VALVETRAIN
- Overview - VALVETRAIN
- Camshaft, Measuring Axial Clearance
- Camshaft, Measuring Radial Clearance
- Camshaft, Removing And Installing
- Camshafts, Removing, Used Camshafts, Reinstalling On Cylinder Bank 1 (Right)
- Camshafts Or Camshaft Bearing, Removing And Installing For Cylinder Bank 1 (Right)
- Camshafts, Removing, Used Camshafts, Reinstalling On Cylinder Bank 2 (Left)
- Camshafts Or Camshaft Bearing, Removing And Replacing On Cylinder Bank 2 (Left)
- Hydraulic Adjusting Elements, Checking
- Valve Stem Seals, Removing And Installing
- Intake And Exhaust Valves
- Special Tools