Oil Pump And High Pressure Pump Drive Chain, Removing And Installing: Installing

WARNING: This page is about a different car, the 2015 Audi A7 Quattro and 2014 Audi A7 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Crankshaft Holder 3242

Courtesy of AUDI OF AMERICA, LLC

Secure crankshaft -1- in "TDC" position using Locking Pin For Crankshaft T40237.

Install in reverse order of removal. Note the following:

-- Stop the high pressure pump chain sprocket with the Locking Pin T40245.

Fig 2: Identifying Locking Pin T40245

Courtesy of AUDI OF AMERICA, LLC

NOTE: The illustration shows the chain sprocket with the lower timing chain cover installed.

-- Install camshaft timing chain, refer to Installing .

-- Remove the Locking Pin T40245 for the high pressure pump chain sprocket.

-- Install the timing chain cover lower section, refer to Installing .