Body Interior - Except Cabriolet (72-Seat-Frames & 74-Seats-Upholstery, Covers)
- 72 - Seat - Frames
- Front seats (standard seat) - vehicles up to 10.04
- Front seats (standard seat) - vehicles from 11.04
- Front seats (standard seat) - vehicles from 11.04
- Front seats (standard seat), removing and installing
- Disconnecting harness connectors
- Airbag Adapter VAS 6036, connecting
- Connector assignment for coupling station
- Modular wiring routing, vehicles from 08.05, assembly overview
- Modular wiring routing with corrugated tubing on front seat
- Seat rail covers, removing and installing
- Front backrest (standard seat), removing and installing
- Backrest adjustment wheel, removing and installing
- Seat height adjustment handle, removing and installing
- Side trim (sill side), removing and installing
- Tunnel-side side trim, removing and installing
- Seat height adjustment unit, removing and installing
- Four-way lumbar support switch, removing and installing
- Drawer, vehicles through 06.06, removing and installing
- Passenger side storage compartment, from 06.06, assembly overview
- Storage compartment, removing and installing
- Storage compartment individual parts, assembly overview
- Storage compartment, disassembling and assembling
- Seat cushion extension, removing and installing (sports seat)
- Backrest, replacing
- Seat pan, replacing
- Backrest cover, removing and installing
- Four-way lumber support, removing and installing - up to 06.06
- Four-way lumbar support positioning motors, removing and installing
- Headrest with insertion lock, removing and installing
- Footwell light, removing and installing
- Front seat (standard seat) without active head restraint system, vehicles from 06.06 or from 11.06, assembly overview
- Backrest without active head restraint system, removing and installing headrests
- Backrest without active head restraint system, removing and installing backrest cover
- Backrest without active head restraint system, removing and installing four-way lumbar support
- Backrest without active head restraint system, removing and installing four-way lumbar support adjusting motors
- Backrest without active head restraint system, removing and installing headrest guides
- Backrest without active head restraint system, removing and installing cover with upholstery
- Backrest without active head restraint system, separating cover from upholstery
- Front seats (power seat with memory) - vehicles up to 10.04
- Front power seats with memory, removing and installing
- Front seat with malfunctioning motor for seat fore-aft adjustment or malfunctioning control module, removing
- Front seat rail covers, removing and installing
- Rear seat rail covers, removing and installing
- Disconnecting connections
- Airbag Adapter VAS 6036, connecting
- Side airbag connector, disconnecting
- Front backrest, removing and installing
- Side panels on door sill side, removing and installing
- Tunnel-side side trim, removing and installing
- Backrest, replacing
- Seat pan, replacing
- Guide for side airbag, removing and installing
- Seat adjustment switch, removing and installing
- Four-way lumbar support switch, removing and installing
- Control module, removing and installing
- Longitudinal seat adjustment motor, removing and installing
- Electrical height adjuster on seats with bolted upper part of seat (older version), replacing
- Electrical height adjuster on seats with upper part of seat laser-welded to seat rail (new version), replacing
- Motor for seat tilt adjustment, removing and installing
- Seat cushion extension, removing and installing (sports seat)
- Backrest adjustment motor, removing and installing
- Backrest cover, removing and installing
- Backrest frame, removing and installing
- Four-way lumbar support, removing and installing
- Four-way lumbar support motors, removing and installing
- Headrest with slide in locking mechanism, removing and installing
- Footwell light, removing and installing
- Spring mat with wiring harness in seat pan, removing and installing
- Seat wiring harness location
- Backrest wiring assignment
- Wiring harness for backrest, removing and installing
- Front seats (power seat with memory) - vehicles from 11.04
- Front seats (power seat with memory) - vehicles from 11.04
- Front power seats with memory, removing and installing
- Front seat with malfunctioning control module or malfunctioning motor for seat fore-aft adjustment, removing
- Disconnecting connections
- Airbag Adapter VAS 6036, connecting
- Connector assignment for coupling station
- Modular wiring routing, vehicles from 08.05, assembly overview
- Modular wiring routing with corrugated tubing on front seat
- Seat rail covers, removing and installing
- Front backrest, removing and installing
- Side panels on door sill side, removing and installing
- Tunnel-side side trim, removing and installing
- Backrest, replacing
- Seat pan, replacing
- Seat adjustment switch, removing and installing
- Four-way lumbar support switch, removing and installing
- Control Module for memory seat, removing and installing
- Longitudinal seat adjustment motor, removing and installing
- Seat height adjustment motor, removing and installing
- Motor for seat tilt adjustment, removing and installing
- Drawer, removing and installing - vehicles through 06.06
- Passenger side storage compartment, assembly overview - vehicles from 06.06
- Storage compartment, removing and installing
- Storage compartment individual parts, assembly overview
- Storage compartment, disassembling and assembling
- Seat cushion extension, removing and installing (sports seat)
- Backrest adjustment motor, removing and installing
- Backrest cover, removing and installing
- Four-way lumber support, vehicles up to 06.06 or from 11.06, removing and installing
- Four-way lumbar support positioning motors, removing and installing
- Headrest with slide in locking mechanism, removing and installing
- Footwell light, removing and installing
- Seat pan, assembly overview
- Seat pan, disassembling and assembling
- Spring mat with wiring harness in seat pan, removing and installing
- Seat wiring harness location
- Backrest wiring assignment
- Wiring harness for backrest, removing and installing
- Front seat (electric memory seat) without active head restraint system, vehicles from 06.06 or from 11.06, assembly overview
- Backrest without active head restraint system, removing and installing headrests
- Backrest without active head restraint system, removing and installing backrest cover
- Backrest without active head restraint system, removing and installing four-way lumbar support
- Backrest without active head restraint system, removing and installing four-way lumbar support adjusting motors
- Backrest without active head restraint system, removing and installing headrest guides
- Backrest without active head restraint system, removing and installing cover with upholstery
- Backrest without active head restraint system, separating cover from upholstery
- Front Recaro seats, vehicles through 10.04
- Seat, removing and installing
- Seat with faulty control module or seat fore-aft adjustment motor, removing
- Front seat rail covers, removing and installing
- Rear seat rail covers, removing and installing
- Disconnecting connections
- Airbag Adapter VAS 6036, connecting
- Side airbag connector, disconnecting
- Front backrest, removing and installing
- Side panels on door sill side, removing and installing
- Tunnel-side side trim, removing and installing
- Drawer, removing and installing
- Guide for side airbag, removing and installing
- Seat adjustment switch, removing and installing
- Four-way lumbar support switch, removing and installing
- Control module, removing and installing
- Longitudinal seat adjustment motor, removing and installing
- Seat height adjustment motor, removing and installing
- Motor for seat tilt adjustment, removing and installing
- Seat surface extension, removing and installing
- Backrest adjustment motor, removing and installing
- Backrest cover, removing and installing
- Backrest frame, removing and installing
- Four-way lumbar support, removing and installing
- Four-way lumbar support motors, removing and installing
- Headrest with slide in locking mechanism, removing and installing
- Rear footwell lighting, removing
- Spring mat with wiring harness in seat pan, removing and installing
- Seat wiring harness location
- Backrest wiring assignment
- Wiring harness for backrest, removing and installing
- Front Recaro seats, vehicles from 11.04
- Front Recaro seats, vehicles from 11.04
- Seat, removing and installing
- Front seat with malfunctioning control module or malfunctioning motor for seat fore-aft adjustment, removing
- Seat rail covers, removing and installing
- Disconnecting harness connectors
- Airbag adapter VAS 6036, connecting
- Side airbag connector, disconnecting
- Front backrest, removing and installing
- Sill and tunnel side trim panels, assembly overview
- Sill side trim and assembly cover, removing and installing
- Tunnel side trim panel, removing and installing
- Sill side trim retaining bracket, assembly overview
- Front retaining bracket, removing and installing
- Rear retaining bracket, removing and installing
- Upper retaining bracket, removing and installing
- Drawer, vehicles through 06.06, removing and installing
- Passenger side storage compartment, vehicles from 06.06, assembly overview
- Storage compartment, removing and installing
- Storage compartment individual parts, assembly overview
- Storage compartment, disassembling and assembling
- Seat adjustment switch, removing and installing
- Four-way lumbar support switch, removing and installing
- Control module, removing and installing
- Longitudinal seat adjustment motor, removing and installing
- Seat Height Adjustment Motor V245 or V246, assembly overview
- Drivers Seat Height Adjustment Motor V245 or V246, removing and installing
- Seat height adjustment toothed segment, removing and installing
- Motor for seat tilt adjustment, removing and installing
- Backrest adjustment motor, removing and installing
- Seat surface extension, removing and installing
- Backrest cover, removing and installing
- Four-way lumbar support, removing and installing
- Four-way lumbar support positioning motors, removing and installing
- Headrest with slide in locking mechanism, removing and installing
- Footwell light, removing and installing
- Spring mat with wiring harness in seat pan, removing and installing
- Seat pan, assembly overview
- Seat pan, disassembling and assembling
- Recaro front seats without active head restraint system, assembly overview
- Backrest without active head restraint system, removing and installing headrests
- Backrest without active head restraint system, removing and installing backrest cover
- Backrest without active head restraint system, removing and installing four-way lumbar support
- Backrest without active head restraint system, removing and installing four-way lumbar support adjusting motors
- Backrest without active head restraint system, removing and installing headrest guides
- Backrest without active head restraint system, removing and installing cover with upholstery
- Backrest without active head restraint system, separating cover from upholstery
- Front RS sport seat
- Seat, removing and installing
- Seat rail cover, removing and installing
- Electrical harness connectors, disconnecting
- Connector housing with terminal resistance for side airbag
- Side panels, removing and installing
- Hand wheel for backrest adjustment, removing and installing
- Seat height adjustment handle, removing and installing
- Lumbar support adjustment switch, removing and installing
- Backrest bolster inflation adjustment button and bolster inflation adjustment button, removing and installing
- Control module, removing and installing
- Front seat backrest and seat pan, removing and installing
- Seat height adjustment unit, removing and installing
- Backrest covers, removing and installing
- Pneumatic block - component assignment
- Rear seats
- Seatbench, removing and installing - vehicles up to 10.04
- Seatbench, removing and installing - vehicles from 11.04
- 1/3 backrest, removing and installing
- 2/3 right backrest, removing and installing
- Center armrest, removing and installing
- Rear seat side padding, removing and installing
- Center bracket, removing and installing
- Outer backrest fitting, removing and installing
- Headrests - component overview
- Headrest with insertion lock, removing and installing
- Headrests without insertion lock, removing and installing
- Fixed backrest, removing and installing
- Rear Recaro seats
- 74 - Seats - Upholstery, Covers
- Front seat covers and upholstery
- Front seat covers and upholstery (seat memory, electrical seat adjustment)
- Cover and upholstery for seat pan, removing and installing (standard seat)
- Cover and cushion for seat pan, removing and installing (sport seat)
- Cover and cushion for backrest, removing and installing (sport seat, standard seat)
- Headrest guides, vehicles through 10.04, removing and installing
- Headrest guides, removing and installing - vehicles from 11.04
- Seat heating element, removing and installing (standard seat)
- Seat heating element, removing and installing (sports seat)
- Backrest heating element, removing and installing
- Cover and upholstery for headrests with slide in locking mechanism, removing and installing
- Front Recaro seat covers and upholstery
- Seat cushion and cover of front RS sport seat
- Rear seat covers and upholstery
- Rear Recaro seats