Lumbar support adjustment switch, removing and installing

Special tools, testers and auxiliary items required 

Fig 1: Special Tool - Engine And Transmission Holder VAS 6095

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Engine and transmission holder VAS 6095

Fig 2: Fixture For Seat Repair VAS 6136

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Fixture for seat repair VAS 6136

Fig 3: Removing Lumbar Support Adjustment Switch Bolts

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Removing 

• Remove seat → Seat, removing and installing .
• Mount the fixture for seat repair VAS 6136 on the engine and transmission holder VAS 6095.
• Attach the front seat to the fixture for seat repair VAS 6136.
• Remove side trim on sill side → Side panels, removing and installing .

• Remove bolts - arrows  -.
• Remove lumbar support adjustment switch - 1  -.

Installing 

Installation is reverse of removal, noting the following:

Tightening torque