2/3 backrest cover and upholstery, removing and installing
Fig 1: Divided Backrest Cover And Upholstery Remove/Install Components (2/3 Backrest Cover And Upholstery, Removing And Installing)
- Removal:
- Remove backrest → 2/3 right backrest, removing and installing
- Remove bolt - 2 - (2x) of lock trim - 1 -.
- Press latch lever - 3 - in direction of arrow.
- Lift latch trim - 1 - off.
- Remove headrests - 4 - :
- Headrests with slide in locking mechanism → Headrest with insertion lock, removing and installing
- Headrests without slide in locking mechanism → Headrests without insertion lock, removing and installing
- Remove headrest guides - 5 -.
- Headrest guides with slide in locking mechanism → Headrest guides with insertion lock, removing and installing
- Outer headrest guides without slide in locking mechanism → Outer headrest guides without insertion lock, removing and installing
- Inner headrest guides without slide in locking mechanism → Inner headrest guides without insertion lock, removing and installing
- Remove center armrest - 11 -.
- Remove ski sack - 11 - → Ski sack, removing and installing (folding rear seat backrest) .
- Using a screwdriver, pry off cover for three-point seatbelt - 12 -.
- Pry off plastic strip - 6 - (4x) from brackets - 7 - (4x).
- Remove plastic strip - 8 - (4x) from bracket.
- Pry out rear plastic strip - 13 - all around using a screwdriver.
- Remove upholstery piece - 15 - from backrest panel - 9 -.
- Turn back cover - 14 -.
- Lever out grip channel - 16 - from plastic clip - 17 - using a screwdriver.
- Remove cover - 14 -.
Fig 2: Divided Backrest Cover And Upholstery Remove/Install Components (2/3 Backrest Cover And Upholstery, Removing And Installing)
1 - Latch trim
2 - Bolts (Qty. 2)
3 - Lock lever
4 - Headrest (Qty. 2)
- Outer rear headrests not the same as front headrests.
- If you remove all headrests, mark them with adhesive tape.
5 - Headrest guides (Qty. 4)
- Removing and installing → Headrest guides with insertion lock, removing and installing
- Install headrest guide with button at left.
6 - Plastic strip (Qty. 4)
7 - Bracket (Qty. 4)
8 - Plastic strip (Qty. 4)
9 - Backrest shell
10 - Center armrest
11 - Ski bag
12 - Three-point belt cover
13 - Rear plastic strip all around
14 - Cover
15 - Upholstery
16 - Fastening strip
17 - Plastic clips
- Replace damaged plastic clips