Sill and tunnel side trim panels, assembly overview

1 - Front seat

2 - Tunnel side trim

• Removing and installing → Tunnel side trim panel, removing and installing 

3 - Expanding rivet

• Qty. 4

4 - Rear sill side trim

• Removing and installing Front and rear sill side trim, removing and installing 

5 - Bracket

6 - Screw

• 1.0 Nm

7 - Screw

• 3.5 Nm

8 - Assembly cover

• Removing and installing Assembly cover, removing and installing 

9 - Bracket

• Qty. 2

10 - Eyelet

11 - Drivers Seat Lumbar Support Adjustment Switch E176 or Front Passenger s Seat Lumbar Support Adjustment Switch E177

• Removing and installing → Four-way lumbar support switch, removing and installing 

12 - Actuator

• For Backrest Adjustment Button E425
• Pry out with Trim Removal Wedge 3409

13 - Actuator

• For Seat Fore/Aft Adjustment Button E418
• For Inclination Adjustment Button E421
• For Seat Height Adjustment Button E424
• Pry out with Trim Removal Wedge 3409

14 - Catch

15 - Front sill side trim

• Removing and installing Front and rear sill side trim, removing and installing 

16 - Connector

• Qty. 3

17 - Front retaining bracket

• Removing and installing → Front retaining bracket, removing and installing 

18 - Upper retaining bracket

• Removing and installing → Upper retaining bracket, removing and installing 

19 - Rear retaining bracket

• Removing and installing → Rear retaining bracket, removing and installing