Tunnel-side side trim, removing and installing

Special tools, testers and auxiliary items required 

• Engine and transmission holder VAS 6095

• Fixture for seat repair VAS 6136

1 - Backrest

2 - Screws (4x)

3 - Rear side trim (sill side)

4 - Front side trim (sill side)

5 - Connector (3x)

6 - Side trim (tunnel side)

• Removal:

• Remove seat → Front power seats with memory, removing and installing .
• Mount the fixture for seat repair VAS 6136 on the engine and transmission holder VAS 6095.
• Attach the front seat to the fixture for seat repair VAS 6136.
• Remove bolts - 7  - (2x).

• Remove side panel - 6  - upward.

• Installing: 

Installation is reverse of removal.

7 - Screws, (2x)

8 - Backrest cover rubber strap