Backrest heating element, removing and installing
Removing
- Remove seat → Seat, removing and installing .
- Remove the backrest → Front seat backrest and seat pan, removing and installing .
NOTE:
- Electrical wiring harness must not be loosened at seat pan.
- Set aside backrest toward rear on soft surface.
- Remove backrest cover and upholstery → Backrest cover and padding, removing and installing .
- Cut out area - A - with electrical connection wire from old heating element.
- Remove old electrical connection wire.
- Disconnect electrical wire connections to heating elements at backrest bolsters at positions - B -.
- Disconnect electrical connection wires to upper backrest heating element at positions - C -.
Installing
- Align new heating element on backrest surface, remove protective foil and glue new heating element to same positions as old heating elements.
- Route connecting wires to backrest bolsters through openings in seat cushion without crossing.