Backrest heating element (glued in), removing and installing

Removing: 

• Remove seat → Front power seats with memory, removing and installing .
• Remove the backrest → Front backrest, removing and installing .
• Remove cover and padding from backrest → Backrest cover and padding, removing and installing .

Fig 1: Identifying Heating Element, Electrical Wire & Gap

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Cut wire - 3  - off of old heating element - 1  -.

Installing: 

• Align heating element - 1  - on backrest surface, remove protective foil and glue heating element to cushion.
• Insert electrical wire - 3  - into gap - 4  -.
• Lay wire connections without crossing into bottom of openings at positions - 2  -.