Anti-Lock Brake System (Abs) - 5.3 & Abs/TC 5.3, Diagnosis - 911 CARRERA (996)

ABS 5.3 and ABS/TC 5.3 systems
- Important information about ABS 5.3 and ABS/TC 5.3
  - General
  - Differences between ABS 5.3 and ABS/TC 5.3
- ABS 5.3 (3-channel system) system description
  - ABS operation
- Diagram: ABS 5.3 (3-channel system)
- ABS/TC 5.3 (4-channel system) system description
- Function
- Switching off driving stability control
- Switching driving stability control back on
- Diagram: ABS/TC 5.3 (4-channel system)
- Component arrangement (ABS 5.3 and ABS/TC 5.3)
- Function of individual components
- Tools
- Connecting Porsche System Tester 2
- Ground points for ABS and ABS/TC
- Connector assignment, control module (ABS and ABS/TC)
- Function selection (menu selection), ABS 5.3 and ABS/TC 5.3
  - Overviews of available menus
- Fault memory
- Fault overview / troubleshooting (diagnosis / test plan)
  - Notes
  - Notes on fault memory / troubleshooting
  - Work after fault elimination
  - Test point 1
    - DTC 4607
    - Possible causes, elimination, notes
  - Test point 2
    - DTC 4206
    - Possible causes, elimination, notes
    - Procedure:
    - Further to test 1
    - Further to test 2
  - Test point 3
    - Fault code 4201
    - Possible causes, elimination, notes
  - Test point 4
    - Fault code 4211
    - Possible causes, elimination, notes
  - Test point 5
    - Fault code 4216
    - Possible causes, elimination, notes
  - Test point 6
    - Fault code 4205
    - Possible causes, elimination, notes
  - Test point 7
    - DTC 4200
    - Possible causes, elimination, notes
  - Test point 8
    - DTC 4210
    - Possible causes, elimination, notes
  - Test point 9
    - DTC 4215
    - Possible causes, elimination, notes
  - Test point 10
    - DTCs 4226, 4231, 4236, 4241, 4246, 4251, 4256, 4261
    - Possible causes, elimination, notes
  - Test point 11
    - DTC 4276
    - Possible causes, elimination, notes
  - Test point 12
    - DTC 4266
    - Possible causes, elimination, notes
  - Test point 13
    - DTC 4340
    - Possible causes, elimination, notes
  - Test point 14
    - DTC 4225
    - Possible causes, elimination, notes
  - Test point 15
    - DTC 4802
    - Possible causes, elimination, notes
  - Test point 16
    - DTC 5260
    - Possible causes, elimination, notes
  - Test point 17
    - DTC 5265
    - Possible causes, elimination, notes
  - Test point 18
    - DTC 5281
    - Possible causes, elimination, notes
  - Test point 19
    - DTC 5282
    - Possible causes, elimination, notes
  - Test point 20
    - DTC 5283
    - Possible causes, elimination, notes
  - Test point 21
    - DTC 5284
    - Possible causes, elimination, notes
  - Test point 22
    - DTC 5285
    - Possible causes, elimination, notes
  - Test point 23
    - DTC 5286
    - Possible causes, elimination, notes
- Drive links (ABS and ABS/TC)
  - Notes
  - Drive links with Solo ABS
  - Drive links with ABS/TC
- Diagnosis / test plan (troubleshooting) for drive links
  - Further to MILs and information light
  - Further to the return pump
  - Further to front and rear ABS solenoid valves (Maintain pressure and Reduce pressure)
  - Further to the intake and switch-over valves (solenoid valves for ABD)
- Actual values (ABS and ABS/TC)
  - Notes
  - Example (front left wheel)
  - Example (all wheels)
    - Notes
    - Procedure:
  - Further to test 1
  - Nominal values/required display
  - Further to test 2
- Input signals (ABS and ABS/TC)
- Static test (ABS and ABS/TC)
- Menu: Bleed (ABS/TC 5.3)
  - Bleeding
    - Important notes
    - Bleeding the ABD circuit
- Menu: Coding (ABS/TC 5.3)
  - Extract coding
  - Modify coding
- System test (ABS and ABS/TC)
  - Important notes
- System test overview (ABS and ABS/TC)
  - Notes
  - Test step
- System test ABS and ABS/TC
  - Notes
  - Test step 24
    - Notes
    - Possible causes, elimination, notes
Introduction, - as of MY 2002
- Notes
- General instructions/safety instructions
- New speed sensor
- Communication between control module and Porsche System Tester II 9588
- General information on the fault memory
- Diagnostic conditions
- Possible causes of fault
- Diagnosis/troubleshooting
- Tools, - as of MY 2002
- Component arrangement - as of MY 2002
- Connector assignment, - as of MY 2002
  - ABS control unit wiring harness plug
- Control unit function - as of MY 2002
Fault code 4200 - as of MY 2002
- Speed sensor lead, front right
Fault code 4201 - as of MY 2002
- Speed sensor, front right
Fault code 4205 - as of MY 2002
- Speed sensor lead, front left
Fault code 4206 - as of MY 2002
- Speed sensor, front left
Fault code 4210 - as of MY 2002
- Speed sensor lead, rear right
Fault code 4211 - as of MY 2002
- Speed sensor, rear right
Fault code 4215 - as of MY 2002
- Speed sensor lead, rear left
Fault code 4216 - as of MY 2002
- Speed sensor, rear left
Fault code 4225 - as of MY 2002
- Incorrect wheel speed on one wheel
Fault code 4226 - as of MY 2002
- ABS exhaust valve, front right
Fault code 4231 - as of MY 2002
- ABS inlet valve, front right
Fault code 4236 - as of MY 2002
- ABS exhaust valve, front left
Fault code 4241 - as of MY 2002
- ABS inlet valve, front left
Fault code 4246 - as of MY 2002
- ABS exhaust valve, rear right
Fault code 4251 - as of MY 2002
- ABS inlet valve, rear right
Fault code 4256 - as of MY 2002
- ABS exhaust valve, rear left
Fault code 4261 - as of MY 2002
- ABS inlet valve, rear left
Fault code 4266 - as of MY 2002
- Return pump fault
Fault code 4276 - as of MY 2002
- Valves voltage supply
Fault code 4340 - as of MY 2002
- Stop light switch
Fault code 4607 - as of MY 2002
- Control unit faulty
Fault code 4802 - as of MY 2002
- Undervoltage
Fault code 5520 - as of MY 2002
- CAN data bus
Fault code 5522 - as of MY 2002
- CAN message missing from DME
Fault code 5525 - as of MY 2002
- Incorrect data exchange from DME
Fault code 5555 - as of MY 2002
- CAN message missing from instrument cluster 1