Nominal values/required display
Speed steps of approx. 0.06 km/h. First display at 1.81 km/h. This means: From the value measured last, the next value must be 0.06 km/h higher or, if the wheel is rotating slower, must be 0.06 km/h lower. The Tester rounds the value down to 0.05 km/h or up to 0.07 km/h in some cases.
Example
First measured value = 1.81 km/h
Second nominal value = 1.87 km/h
Third nominal value = 1.93 km/h
etc.
NOTE:
When performing the test on the rear axle, lock up (hold) the opposite wheel.