LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2003 >> 911 Carrera 4S, Standard >> Repair and Diagnosis >> Brakes >> Anti-Lock Brakes >> Anti-Lock Brake System (Abs) - 5.3 & Abs/TC 5.3, Diagnosis - 911 CARRERA (996) >> ABS 5.3 and ABS/TC 5.3 systems >> Fault overview / troubleshooting (diagnosis / test plan) >> Test point 16 >> Possible causes, elimination, notes

Possible causes, elimination, notes

The complete hydraulic unit must be replaced if the intake valve is damaged.

In the intake valve test with the Porsche System Tester 2, select Intake valve in the Drive links menu.

Perform the test according to the Tester instructions. If the functions specified in the Tester display: Rear axle locked up / Rear axle still locked / Release (rear axle free) are not achieved, the following faults are possible:

  1. Test sequence not observed.
  2. ABD secondary circuit poorly bled. Bleeding: see MENU: BLEED (ABS/TC 5.3)  .
  3. Function of the intake valve not OK.
  4. Return pump operation not OK. Check pump operation. To do this, select return pump in the Drive links menu (pump must then run).
  5. Intake or switch-over valve leaks.