Section 62 (Body - Repair (R61) -- Cooper Paceman)
WARNING: This page is about a different car, the 2016 MINI Cooper Paceman, 2015 MINI Cooper Paceman, 2014 MINI Cooper Paceman, and 2013 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
- Safety Information
- Body, General
- 41... 0 Notes on the repair technique used in the main group 41
- 41 00... Blind rivet
- 41 00... Bonding on painted/primed surfaces
- 41 00... Bonding steel on steel
- 41 00... Corrosion protection
- 41 00... EMC screws
- 41 00... Frame alignment control dimensions, body
- 41 00... Gap dimensions, body
- 99 00... General instructions on paintwork
- 51 14... General notes for labelling with adhesive films
- 41 00... Grinding aluminium components
- 41 00... Grinding steel parts
- 41 00... Handling airbags and restraint systems
- 11 00... Handling components after flood damage
- 41 00... Handling electrical system and electronics
- 41 00... Information on metal filler
- 41 00... Information on vehicle protection
- 41 00... Information/warning labels
- 41 00... Installation solution for straight shank/hexagon rivet nut
- 41 00... Installing a cavity sealing with 2-component PU cavity foam
- 41 00... Installing cavity sealing (expanded)
- 41 00... Installing cavity sealing (not expanded)
- 41 00... Materials science
- 36 10... Notes for repairing aluminium rims
- 41 00... Notes on adhesive K1
- 41 00... Notes on adhesive K2
- 41 00... Notes on adhesive K3
- 41 00... Notes on adhesive K4
- 41 00... Notes on adhesive K5
- 41 00... Notes on adhesive K6
- 41 00... Notes on cleaning agent R1
- 61 00... Notes on handling the high pressure cleaner
- 32 00... Notes on replacement of steering gear/steering column/steering shaft following accident damage
- 41 00... Notes on the water drain hose of the slide/tilt sunroof
- 99 Notes on using temperature-controlled infra-red radiators
- 41 00... Opening bonded connections
- 41 00... Opening brazed connections
- 41 00... Opening rivet connections
- 41 00... Opening welded connections
- 41 00... Overview of adhesive cartridge guns
- 41 00... Overview of consumables
- 41 00... Position of shaped parts for cavity sealing
- 41 00... Punch rivets
- 41 00... Quality standard
- 41 00... Reinforcement plate with stud bolt (bonded)
- 41 00... Repair solution for straight shank/hexagon rivet nut
- 41 00... Repair techniques, repair stage 1
- 41 00... Repair techniques, repair stage 2
- 41 00... Repair techniques, repair stage 3
- 63 12... Repairing headlights
- 41 00... Repairing plastic components
- 41 00... Replace bolts
- 41 00... Replacement parts standards
- 41 00... Replacing blind rivets
- 41 00... Separating cut determination with a template
- 41 00... Setting blind rivet nuts and bolts
- 41 00... Soldering steel components
- 41 00... Spot-weld bonding steel components
- 41 00... Spray gun for cavity sealant
- 41 00... Stamping vehicle identification number
- 41 00... Straightening aluminium component on the outer skin
- 41 00... Straightening aluminium components in structure
- 41 00... Straightening steel components in the structure
- 41 00... Straightening steel components on the outer skin
- 99 00... Touching up paintwork damage
- 41 00... Vehicle identification number, general
- 41 00... Welding in reinforcement plate (sheet steel)
- 41 00... Welding steel components
- 41 00... Working with 2-component PU cavity foam
- 41 00... Workshop equipment (BMW and MINI vehicles)
- Support Members
- 41 11 082 Replace the engine support in front of the front axle
- 41 11 081 Replacing engine support in front of front axle, left
- 41 11 071 Replacing engine support with left wheel arch in front of bulkhead
- 41 11 311 Replacing entrance for door front left
- 41 11 751 Replacing luggage compartment floor and side member on left (left side wall and tail panel removed)
- 41 11 751 Stripping operations - Replace the left side member and luggage compartment floor (removed left side wall and tail panel)
- 41 11 751 Stripping operations - replace the left side member and luggage compartment floor, all-wheel drive vehicle (removed left side wall and tail panel)
- Luggage Compartment Floor
- 41 12 535 Replacing luggage compartment floor and both side members (tail panel removed)
- 41 12 557 Replacing middle luggage compartment floor (tail panel has been removed)
- 41 12 557 Stripping operations - Replacing center luggage compartment floor, all-wheel drive vehicle (tail panel removed)
- 41 12 535 Stripping operations - Replacing luggage compartment floor and both side members (tail panel removed)
- 41 12 535 Stripping operations - Replacing luggage compartment floor and both side members, all-wheel drive (tail panel removed)
- 41 12 557 Stripping operations - Replacing luggage compartment floor, middle (tail panel removed)
- Wheel Wells
- Side Frame And Door Pillars
- Roof Outer Skin
- Dash Cowl
- Front Trim Panel
- Rear Trim Panel
- Side Panels
- Front Side Doors
- Front Lid
- Rear Lid
- Other Flaps