Collision - Rear Wall & Rear End
- Testing & Repair
- Remove Battery Box - Ar64.20-P-0001-01XG
- Install Battery Box - Ar64.20-P-0001-03XG
- Replace Battery Box 30.04.2019 - Ar64.20-P-0001XG
- Cut Off Rear End Center Assembly - Ar64.20-P-1000-02XG
- Prepare Bottom Rear Center Section For Installation - Ar64.20-P-1000-07XG
- Install And Weld In Bottom Rear Center Section - Ar64.20-P-1000-08XG
- Replace Complete Bottom Rear Center Section - Ar64.20-P-1000XG
- Remove Rear Portal - Ar64.20-P-1001-01A
- Prepare Mating Surfaces Of Body On Rear Portal For Installation - Ar64.20-P-1001-02A
- Install Rear Portal - Ar64.20-P-1001-04A
- Prepare Rear Portal For Installation - Ar64.20-P-1001-05A
- Replace Rear Portal - Ar64.20-P-1001A
- Install Cross Member And Weld In - Ar64.20-P-1060-03XG
- Remove CROSSMEMBER - Ar64.20-P-1060-10XG
- Prepare CROSSMEMBER For Installation - Ar64.20-P-1060-11XG
- Replace Bottom Rear Center Section Together With Rear CROSSMEMBER - Ar64.20-P-1060XG
- Remove Rear Floor Assembly Reinforcement - Ar64.20-P-1141-01XG
- Prepare Rear Floor Reinforcement - Ar64.20-P-1141-02XG
- Weld In Rear Floor Reinforcement - Ar64.20-P-1141-03XG
- Partially Remove Rear Floor Assembly - Ar64.20-P-1310-01XG
- Partially Prepare Rear Floor Assembly - Ar64.20-P-1310-02XG
- Partially Install Rear Floor Assembly - Ar64.20-P-1310-04XG
- Partially Replace Rear Floor Assembly - Ar64.20-P-1310XG
- Torque Specifications