MITSUBISHI Connect Safeguard Services & Remote Services
- General Information
- Special Tools
- Diagnostic
- Diagnostic Trouble Code Chart
- Diagnostic Trouble Code Procedures
- DTC B1852: Collision Signal Connection
- DTC B1853: Collision Signal Communication
- DTC B1854: TEL Antenna Connection
- DTC B1855: GPS/GLONASS Antenna Connection
- DTC B1856: Speaker Connection
- DTC B1857: Microphone Connection
- DTC B1858: SW Connection
- DTC B1859: SW Fail
- DTC B1860: Battery Connection
- DTC B1861: Battery Fail
- DTC B1864: Relay Box Connection
- DTC B1866: Connection abnormality, +B
- DTC B1867: Connection abnormality, IG
- DTC B1868: Connection abnormality, Tel Antenna Secondary
- DTC B1869: TCU Internal Error
- DTC B1870: TSP Manager Error
- DTC B210D: Power Supply Low Battery
- DTC B210E: Power Supply High Battery
- DTC U0100: Engine CAN Timeout
- DTC U0141: ETACS CAN Timeout
- DTC U0151: SRS-ABG CAN Timeout
- DTC U0155: Meter CAN Timeout
- DTC U0164: A/C CAN Timeout
- DTC U0245: NAVI/DISP.AUDIO CAN Timeout
- DTC U1000: OSS/KOS_OSS CAN Timeout
- DTC U1190: No Receive Fault Detect Signal
- DTC U1195: Coding Not Completed
- Trouble Symptom Chart
- Symptom Procedures
- Inspection Procedure 1: Power supply to the TCU fails [Cannot communicate with TCU using the scan tool (M.U.T.-IIISE)]
- Inspection Procedure 2: SOS switch/information switch indicator light does not illuminate
- Inspection Procedure 3: ECALL speaker/front door speaker (RH) does not sound
- Inspection Procedure 4: Your voice is not transferred during a call
- Inspection Procedure 5: SOS switch does not respond (It does not start calling to the telematics call center)
- Inspection Procedure 6: Information switch does not respond (It does not start calling to the telematics call center)
- Inspection Procedure 7: GPS can not be received
- Inspection Procedure 8: SOS emergency assist/information assist does not connected (It can start the calling to the telematics call center)
- Inspection Procedure 9: It cannot communicate with a smartphone
- Data List Reference Table
- Special Function Table
- Check At Ecu Terminals
- On-Vehicle Service
- TCU
- ECALL Speaker
- ECALL Relay Box Assembly
- Antenna
- ECALL & BCALL Switch