Section 12 (Exhaust Manifolds, Emission Control - 164 Chassis -- Diesel)
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 Mercedes-Benz ML350, 2010 Mercedes-Benz ML350, 2009 Mercedes-Benz ML320, 2009 Mercedes-Benz GL320, and 2008 Mercedes-Benz ML320. However, it is still accessible from the selected car via links, so may be relevant.
- General Information
- Maintenance
- Testing & Repair
- Remove/install exhaust manifold - AR14.10-P-3915GZB
- Remove/install exhaust gas recirculation positioner - AR14.20-P-1020GZB
- Remove/install exhaust gas recirculation bypass flap - AR14.20-P-7661CD
- Remove/install exhaust gas recirculation cooler - AR14.20-P-7665GZB
- Remove/install the diesel particulate filter - AR14.40-P-1000GZB
- Remove/install injection nozzle for exhaust aftertreatment system - AR14.40-P-2000GZB
- Remove/install injection line for exhaust aftertreatment system - AR14.40-P-2001GZB
- Remove/install temperature sensor upstream of SCR catalytic converter - AR14.40-P-2011GZB
- Remove/install AdBlue® tank - AR14.40-P-2014GZB
- Remove/install SCR frame module control unit - AR14.40-P-2020GZB
- Remove/install AdBlue delivery module - AR14.40-P-2021GZB
- Remove/install NOx sensor with controller unit - AR14.40-P-2038GZB
- Check AdBlue® concentration - AR14.40-P-2041GZB
- Remove/install SCR AdBlue combination sensor for fill level and temperature with integral AdBlue heat duct - AR14.40-P-2044GZB
- Safety Precautions
- Safety information: Exhaust manifold, engine brake, emission control system - AS14.00-Z-9999ZZ
- Risk of burn injuries and scalding when working at AdBlue lines and the components attached to them. Risk of injury to skin and eyes when handling AdBlue. Risk of poisoning caused by swallowing AdBlue - AS14.40-Z-0001-01A
- Test & Adjustment Values
- Capacities & Specifications
- Forms
- Wiring Diagrams
- Special Tools